No, location 3 is used to store the number that needs to be added to 'A m F' to turn it into 'E m+2 F'. The accumulator gets the entire command 'A m F' stored into it, this means when you add the number stored in 3 to the accumulator it can be stored as the return op without further manipulation.
Command codes in EDSAC 2 were stored as a 5 bit command code, a spare bit, a 10 bit address, and a final bit indicating whether the command was 'F' (short) or 'D' (long). So, if you're calling a subroutine at position 10, you'd store the return address with 'A 10 F' which is '11100 0 0000001010 0'
And you need to return from the subroutine function with 'E 12 F' (because you want to skip before the accumulator and the jump instruction you return to the stored value + 2), which is '00011 0 0000001100 0'. Location 3 is used to store the difference between these two values which is always...
... the same 'U 2 F' (00111 0 00000 00010 0). Add this to 'A 10 F' and you get 'E 12 F' -- which, looking at it now, I think only works because of arithmetic overflow.
Ok, thanks. I think I got it: to get the return location we use the current line which was relocated so has the correct current program counter. The A instruction does this for us, and adds the contents of the current pc location which is the instruction A m. 1/ .
This is how we capture m, the current pc. In the subroutine we add the difference between A and E instructions (and m to m+2 to go the instruction after the jump) to get a return jump and plug it at the end of the subroutine. This is a constant value. 2/
Presumably E jumps on positive and G on negative unrelated to this, simply the way conditional branching was implemented way before subroutines were contemplated. 3/3
Correct. I'm not sure about the last point though. Wheeler mentions in the paper you referenced that they were thinking about subroutines as early as '48 and so I think it more likely that the E/G distinction was included for more general use and the issue here just tolerated.
Excellent. That’s pré what I was wondering about.
(Tolerated describes what I assumed. So they may have contemplated subroutines, but the E/G behavior wasn’t designed for that purposed). It’s path dependence.